Description
Trigger Systems Sapphire Cube 20 C Refugium Sump
The Sapphire series introduces several new features not found anywhere else. Some of the features of the Sapphire sumps are:
Lid to prevent splashing
Adjustable water height
Self adjusting foam block platform (PAT PENDING)
Dual platforms
Protein skimmer section
Refugium section
Sapphire blue coloring to block light and prevent unwanted algae growth in other sections
Trigger Systems Sapphire Cube 20 C Refugium Sump
The Sapphire series introduces several new features not found anywhere else. Some of the features of the Sapphire sumps are:
Lid to prevent splashing
Adjustable water height
Self adjusting foam block platform (PAT PENDING)
Dual platforms
Protein skimmer section
Refugium section
Sapphire blue coloring to block light and prevent unwanted algae growth in other sections
Interchangeable Plates
Each Sapphire sump comes with two plates that can be placed into Section 1:
Filter Sock Plate
Foam Block Plate
The filter sock plate is installed when the included 100 micron filter socks are desired.The foam block plate is perforated with holes and comes with a foam sponge block filter. The foam block plate can be used when filter socks are not desired or in the case when the filter socks need to be changed or cleaned but replacements socks are not readily available but yet mechanical filtration is needed. In this case, simply remove the filter sock plate and install the perforated foam block plate and then place the included foam sponge block filter in place.
Adjustable Water Level
Water level in the sump is adjustable from 7” to 9.5” to accommodate for the water height requirements for different protein skimmers.
Self Adjusting Foam Block
As the water level is adjusted by sliding the wall up and down, the foam block sponge filter and the perforated plate that it sits on will also move up and down automatically. This is important to maintain the correct location of the foam block sponge filter with respect to the sump water height.
Probe Holder
All Sapphire sumps come with a probe holder that can hold up to three probes. The two outside holes are 0.63” in diameter and the center hole is 0.8” in diameter to fit different sized probes.
Hose Holder
All Sapphire sumps also come with 4 holes in the top support brace for holding in place 1/4” OD tubing from reactors, dosing pumps, ATO, etc.
Trigger Systems Sapphire 20 CSpecifications:
Dimensions: 20″ long x 20″ wide x 15″ highSkimmer Section: 11.625″ x 9″Refugium Section: 19.5″ x 6″Return Pump Section: 10.25″ x 7.625″Total Water Volume: 24.3 gallonsSkimmer Water Level: 7″ to 9.5″ adjustableDrain Input Fittings: 1Filter Socks: 1
Product code: 6111Item No. FT-TS-SAP20
